Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 020405ac0103030301010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.
Default TCP Receive Window (RWIN) = 384000
RWIN Scaling (RFC1323) = 3 bits (scale factor of 6)
Unscaled TCP Receive Window = 48000
For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
63888 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 15360 kbps (1920 KBytes/s) @ 200ms
Your TCP Window limits you to: 6144 kbps (768 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = OFF
Time to live left = 121 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000 (240)
Precedence (priority) = 111 (Network Control)
Delay = 1 (low delay)
Throughput = 0 (normal throughput)
Reliability = 0 (normal reliability)
Cost = 0 (normal cost)
Check bit = 0 (correct, 8th checking bit must be zero)
DiffServ (RFC 2474) = No valid DiffServ equivalent. See the TCP Optimizer documentation, or RFCs 2474, 2475, 2597, 2598, 2873.
IS that better?
